MAGICFX
®
PSYCO2JET
—
User and Installation Manual
31
3.8
REPLACE A CO
2
CYLINDER
1
Make sure the safety address is not activated (FX LED indicator on each
machine is dimmed).
2
Close the CO
2
cylinder.
In case of multiple machines, connected
in series: Close all CO
2
cylinders.
3
Activate the Safety address again. The FX LED indicator on each connected
machine lights up.
4
Activate the Start address for CO
2
output to release the pressure from the
system.
5
Deactivate all operational addresses.
6
Deactivate the Safety address.
