MULTIPOINT USB OVER LAN WORKSTATION M
WS9940
40
1. Disconnecting a Workstation while videos are playing may cause stability issues. Do
not disconnect Workstations during video playback.
2. Using different display resolutions on workstations may cause display issues if a station
is disconnected. Set all workstations to the same resolution for the best performance.
3. Video play back performance is rely on USB2.0 bandwidth and limited to maximum
bandwidth of 480 Mbit/s [60 MB/s] , therefore smaller scale display window at lower
resolution is recommend.
4. When all station needs for video playback, smallest scale window is recommended.
eg. when all 10 station playing youtube, keep every video frame at original or smallest
size. for better performance, upgrade to a higher level CPU and increase memory is
recommended.
5. Multi-Video Playback at each workstation is not recommended, it occupied CPU's
loading and lower each task performance, it could cause operation freeze when CPU
consumption is over its limited.
6. Prior to installing the MCT driver, the computer should be running the most current build
of Windows MultiPoint Server 2011 and have the appropriate graphics card driver from
the list showed at "System Requirement" page.
7. Due to Ethernet bandwidth limitation, for smooth playing performance, minimize video
playback landscape is recommended when multiple videos playing across many
monitors simultaneously, scale are recommended as below:
- 2 users: full screen
- 4 users: 1/3 landscape
- 6 users: 1/4 landscape
- 8~10 users: 1/8 landscape
8. MWS9940 is default for 10 stations at the moment, excess station is to be requested.
Driver installation may take 2 to 3 minutes. Initial mapping may take 5 minutes for 10
stations after driver installed. Regular rebooting may take 3 to 4 minutes to get auto
mapping on all stations.
TROUBLESHOOTING TIPS
The following troubleshooting tips may help if you are experiencing any difficulties using our device.
• Check to see that the monitor is connected correctly and the power is ON.
• Make sure to restart the server after the driver installation.
• When disconnect the power adapter or Ethernet cable, wait for a few seconds for re-connecting it.
•
Check the website to make sure you have the latest drivers.
• Reset/refresh/resynchronize your monitor if the screen is not in proper (center).
•
Full screen video display is not recommended; use Intel Sandy Bridge chipset may help with better
performance.
DRIVER
RELESE
NOTED
For immediate support, visit MCT's website:
http://www.mct.com.tw
to find the update driver,
Knowledge Base articles, and software for your device. You can also chat live with a support technician or
submit a trouble ticket.
.
Copyright© 2011 Magic Control Technology Corp. All rights reserved. All trade names are registered trademarks of their respective owners.
Features and specifications are subject to change without notice. Product may not be exactly as shown in the diagrams.