10
USING RINSE AID
•
Rinse-aid makes dishes sparkle and helps them to dry without spotting. Rinse-aid is required for stain-
free utensils and clear glasses.
•
Use only rinse-aid for domestic dishwashers.
•
Filling the rinse aid reservoir with detergent will damage the reservoir. Only pour rinse aid formulated
for residential dishwashers into the reservoir.
NOTE:
When the Rinse Aid indicator lights up, the rinse aid reservoir contains sufficient rinse aid for 2 - 3
programs only. When using “Tab” or combined detergents, rinse aid is not needed.
FILLING THE RINSE-AID AND SETTING THE LEVEL
1.
Pull up the tab to open the rinse-aid
compartment cap
.
(Fig.
4)
2.
Fill the compartment with rinse aid to the
MAX level. Be careful not to overfill the
rinse aid compartment and wipe up any
spills.
3.
Close the cap until it clicks. If the cap is
not properly closed, water can enter the
rinse aid reservoir during the wash
program.
Figure 4
NOTE:
If the dishes are not drying properly or are spotted, increase the level.
If blue stains form on your dishes, decrease the level.
LOADING YOUR DISHWASHER
Properly loading items into the dishwasher is the best way to increase washing and drying performance while
lowering energy consumption.
Load round and deep items as pots with long handles, pot lids, plates, and cutlery sets into the lower rack. The
upper rack has been designed for smaller items, such as dessert plates, salad bowls, cups and glasses. When
placing long stem glasses and goblets, lean them against the basket edge, rack or glass supporter, not against
other items to prevent damage. It is more appropriate to locate thinner parts towards the middle sections of
the racks. Place spoons among the other cutlery items to prevent them from sticking to one another.
It is recommended to use the cutlery grid for best results. To avoid any possible injuries, ALWAYS place long-
handle and sharp-pointed items as serving forks, knives etc. with their sharp points facing down or horizontally
on the baskets.
WARNING
: Arrange dishes in a way that they will not prevent the upper and lower spray arms from spinning.
Level Rinse Aid Dose Indicator
1
None
r1
2
1 dose
r
2
3
2 doses
r
3
4
3
doses
r
4
5
4
doses
r
5
1.
To change the rinse aid level, follow the below steps before turning on the
machine
:
2.
With the dishwasher Off, press and hold the 'Program' button.
3.
While still pressing the 'Program' button, press the 'On/Off' button.
Continue pressing 'Program' until "rA" disappears from the display
and the last rinse aid setting shows (see rinse aid chart).
4.
The Rinse Aid setting can be changed by pressing the 'Program'
button.
Once the setting is selected, press 'On/Off' to turn off the unit and
save the setting.
