21
Unsatisfactory
Washing
The dishes are
not clean
Improper wash
program selected�
Select a more intensive program� Refer to “Wash Cycle
Table”�
Not enough detergent
was dispensed�
Use more detergent, or change your detergent�
Items are blocking the
path of spray arms�
Rearrange the items so that the spray arms can rotate freely�
The filter system
in the base of wash
cabinet is not clean or
is not correctly fitted�
This may cause the
spray arm jets to get
blocked�
Clean and/or fit the filter correctly� Clean the spray arm jets�
Refer to “Dishwasher Care” section�
Glassware is
cloudy
Combination of soft
water and too much
detergent�
Use less detergent if you have soft water and select a short
cycle to wash the glassware and to get it clean� See “Wash
Cycle Table”
Black or gray
marks on dishes
Aluminum utensils
have rubbed against
dishes�
Use a mild abrasive cleaner to eliminate the marks�
Detergent left in
dispenser cups
Dishes blocking deter-
gent cups�
Re-load the dishes properly� See the “Loading the Dish-
washer” section�
Unsatisfactory
Drying
The dishes are
not drying
Dishes not loaded
correctly�
Load the dishwasher as suggested in the directions�
Too little rinse aid�
Increase the amount of rinse aid or refill the rinse aid
dispenser�
Dishes removed too
soon�
DO NOT empty your dishwasher immediately after washing�
Open the door slightly so that the steam can escape� Begin
unloading the dishwasher only once the dishes are cool
enough to touch� Empty the low basket first� This prevents
water from dripping off dishes in the upper basket�
Wrong program
Selection�
Short wash cycles use lower temperatures which lessen
performance� Choose a longer wash program�
Using cutlery with a
low-quality coating�
Water drainage is more difficult with these items� Cutlery
or dishes of this type are not suitable for washing in the
dishwasher�
ERROR CODES
Codes
Meanings
Possible Causes
E1
Longer water inlet time
Faucet not fully open�
Water intake restricted�
Low water pressure�
E4
Overflow
Dishwasher is leaking�
WarNING
:
If overflow error occurs, turn off the main water supply before calling for service� If there is water
in the base from an overflow or leak, the water should be removed before restarting the dishwasher�