12
Figure 6
Figure 7
HOW TO LIGHT THE SURFACE BURNERS
1.
Push in and turn the control knob counterclockwise
to the
light
position
( )
. All surface burners will click
but only the burner with control knob turned to
LITE will produce a flame.
2.
After the burner ignites, turn the control knob to
the desired flame size.
NOTE
: ALWAYS position cooking cookware on the
burner grate before lighting the burner.
CAUTION
: The flame SHOULD NOT extend beyond the
sides or the pot or pan.
IN CASE OF POWER FAILURE
WARNING
: Use extreme caution when lighting burners this way.
1.
Hold a lit match to the desired burner head.
2.
Push and turn the control knob to the “
” position.
3.
Once burner ignites, adjust flame to the desired size.
MIN
MAX
OFF
