How to Defrost
Defrost the freezer compartment when the ice / frost is approximately ¼” thick. This unit has the
function of push button manual defrosting. Please see the temperature control button diagram on
pg.6, press the button of “push button manual defrosting” on the center of thermostat switches from
position I to II firmly ( one firm push is enough, never push continuously), release the button and it can
reach the purpose of defrosting.
After 15 to 50 minutes (depending on the different ambient temperature and setting), defrost button
will go back to the position and the thermostat will continue working. At that time, please remove the
drip tray, empty the water and then put it into the refrigerator after cleaning and drying it. If you are not
satisfied with the defrosting result after one time, you can do that several times until you are satisfied.
Do not use hot water or other electric heating devices to melt the accumulated ice. After defrosting,
remove accumulated ice / water and wipe the freezer compartment dry with a soft cloth. Restart the
unit per starting instructions.
Assembling Legs
If you want to assemble legs, please take out all 4 legs (including 3 long legs and 1 short leg) from the
leg bag. Then screw the legs into the holes at the bottom of the refrigerator with screw bolt of the
caster. Lastly, you will need to adjust the 4 legs, and make them on same level.
Please see the illustration below:
7
