background image

OPERATING YOUR REFRIGERATOR 

 

Temperature Control 

 

  Your refrigerator has one control for regulating the 

temperature. The temperature control is located on 
the upper right corner of the refrigerator 
compartment. 

  The first time you turn the unit on, adjust the 

temperature control knob to “7” and run for at least 2 
hours before putting foods inside. This will ensure the 
cabinet is thoroughly chilled before food is put in.   

  The range of the refrigerator temperature control is 

from position "1" the warmest to "7" the coldest.  
Adjust the temperature control to the setting that best 
suits your needs. The setting of “4” should be 
appropriate for home or office refrigerator use. 

Defrost 
Button

 

Turning the temperature control knob to “0” position stops the cooling cycle but does not shut off 
the power to the unit. 

 
 

 

 

NOTE; 

 

If the unit is unplugged, loses power; you must wait 3 to 5 minutes before restarting the 
unit. If you attempt to restart before this time delay, the refrigerator will not start. 

 

Large amounts of food will lower the cooling efficiency of the appliance. 

 

Do not place the foods on the air outlet, and leave spaces for airflow. 

 

If you choose to change the thermostat setting, adjust thermostat control by one 
increment at a time.  Allow several hours for temperature to stabilize between 
adjustments. 

 

 
The Chiller Compartment 

 

 

This compartment is designed for the ice making and short-term storage of some commercially 
frozen foods. 

  The temperature of the chiller compartment may not reach temperature low enough to store 

frozen foods and works well when the food is already frozen prior to storage. 

 

Place frozen food into the freezer as quickly as possible after purchase. If there are instructions 
on the packet, carefully follow these instructions regarding storage times. 

 

How To Defrost 

 
Defrost the refrigerator when the frost accumulated on the evaporator is about 1/4” thick. 
 
To defrost, simply push the defrost button. Be sure to keep the drain pan in place. Defrosting usually 
takes a few hours. The refrigerator will restart automatically when defrosting ends. Empty water from 
the drain pan after defrosting. 
 

Never use a knife or other sharp metal instrument to scrape ice / frost from the inside of the 
unit.

 

 
 
 
 
 

 

6

Summary of Contents for MCBR445B1F














Reviews: