background image

13

12

9

  

Put the 

Juice Cup Lid

 on 

the 

Juice Cup,

 making 

sure it is tightly sealed, 
and open the locking lid 
latch on top of the lid, 
rotating it up and out of 
the way.

10

  Position the 

Juice Cup

 

under the 

Spout Cap 

so 

that the 

Spout Cap

 is 

directly over, and slightly 
inside, the hole in the 

Juice Cup Lid. 

 note: 

To do this, you’ll need to 

tip the 

Juice Cup

 forward at a 

slight angle, so the hole in the lid 
can slide right under the 

Spout 

Cap

 and fit snugly into place. 

This will help eliminate spillage 
and keep the 

Juice Cup

 in place 

during juicing.

 

note:

 Other containers may 

also be used to collect juice, 
instead of the 

Juice Cup.

7

 

Insert the 

Food Pusher 

into the 

Feed Chute.

 

8

 

Turn the 

Silicone Spout 

Cap

 so the nozzle is 

facing down.

6

  

Guide the 

Pulp Bin

 into 

place at the back of the 
unit, directly under the 
back edge of the 

Juice 

Bowl Cover.

 

Tilting the 

Pulp Bin

 slightly, 

guide it onto the back of 
the

 Juicer

 so that the back 

of the 

Juice Bowl Cover

 

slides into the top of the 

Pulp Bin.

 The 

Pulp Bin

 will ‘snap’ 

into place when properly 
attached. Once the 

Pulp 

Bin

 is attached to the 

back of the 

Juice Bowl 

Cover,

 gently push on the 

base of the 

Pulp Bin

 to 

lock it into place.

5

  

Raise the two 

Locking 

Arms

 on either side of 

the 

Motor Base

 and snap 

them into place. 

 

Lift each arm until the 
top part of it grips the top 
edge of the 

Juice Bowl 

Cover,

 then snap the 

bottom part down until it 
locks. Both arms should be 
in a vertical position and 
locked securely in place.

 warning:

 If the 

Locking Arms

 

are not securely locked in place, 
the juicer will not power on.

11

  Assembled Mini Juicer.

Summary of Contents for Mini juicer


















Reviews: