Magewell ULTRA STREAM, User Manual, Page: 12 / 59

Setting Color
Set color format of preview and stream video.
Previewing Thumbnails
Thumbnails give you a quick snapshot of your video as they’re browsing on the
target video platform and recording.
Descriptions of encoder indicators are as follows.
Descriptions of stream status are as follows.
Brightness: range from -100 to 100, the default value is 0.
■
Contrast: range from 50 to 200, the default value is 100.
■
Saturation: range from 0 to 200, the default value is 100.
■
Hue: range from -90 to 90, the default value is 0.
■
Reset: restore all settings of the color to default settings.
■
Done: save your configuration.
■
HDMI/SDI IN: Light being on indicates input signal is detected; pulsing
slowly indicates input signal is not detected.
■
Ethernet: Light being on indicates Ethernet is connected; pulsing slowly
indicates Ethernet is disconnected.
■
Wi-Fi: Light being on indicates network is detected; pulsing slowly
indicates network is not detected.
■
USB: Light being on indicates USB is available; pulsing slowly indicates
there is insufficient storage on the USB.
■
Resolving DNS: Indicates that domain name resolution is being performed
■
12