Setting NDI TX Sessions
Presets
shows saved stream sources adding manually. Up to 4 sessions are
supported.
Adding/Modifying a Session
Click
Add
or the edit
icon, and set the parameters in the prompt window.
Stream
®
Name
: specify the TX session name, which should be 1 to 30 charactors and
contain A to Z, a to z, 0 to 9 and special characters like _-#()% .
■
Group name
: specify the group that receives NDI streams sent by your
converter.
■
The group name is non case-sensitive, and should contain A to Z, a to z,
0 to 9 and special characters like _-. The group name entry can contain
comma-separated values, allowing your converter to send to all the
groups listed here.
■
The default group is
public
group.
■
Mode:
choose Full NDI (default value) when you need high quality NDI
streams with a gigabit LAN connection. HX NDI is kind of low bandwidth but
high efficiency version of NDI full bandwidth.
■
Discovery server
The receiver and sender can automatically discover each other when they
are in the same network segment.
Turn on the
Discovery server
, and specify the same discovery service IP
address for both sender(s) and receiver(s) which can be pinged by each
other, then they can be discovered by each other automatically. By default,
this function is on.
■
27
Summary of Contents for Pro Convert AES67
Page 1: ......
Page 61: ...Figure3 Linux Terminal Figure4 Mac Network 61 ...