*To avoid errors in the collected heart rate data, make
sure to place the heart rate sensor in the proper
direction. Wear the heart rate monitor directly on your
skin, just below your chest. It should be snug enough to
stay in place during your activity
Wearing the Heart Rate Sensor
3
2. Press the snap studs on the sensor into the snap
sockets on the strap, respectively. Be sure to place the
heart rate sensor in the proper direction.
1. Wet the electrode areas on the reverse side of the
strap.
4. Move the sensor to just below your chest and let the
electrodes contact your skin.
Placement Illustration for Men
Placement Illustration for Women
5.After the sensor is properly worn, it will automatically
turn on, the front LED flashes (turns off after 10 times),
select the correct ANT ID or Bluetooth ID on the bike
computer, watch, and APP, and the heart rate data will
be transmitted
.
Left
Right
3. Wrap the strap around your chest and attach the
hook to the other end of the strap.
LED
20136-169
ANT ID
、
Bluetooth ID
