Get more information at
www.magellangps.com.
6
Installation
Choose a Location
•
A location with a clear view of the sky.
•
Follow Safety guidelines.
Clean the Surface
1. Clean the area on the windshield where
the device will be mounted.
2. Allow the surface to dry.
Attach the Device
Connect Power
The device battery charges whenever it is
connected to vehicle power.
1. Connect the power cable to a vehicle
power receptacle.
2. Check the light on the vehicle power
connector and make sure it is on.
If the indicator light is not on, you may
need to reseat the connector or turn the
vehicle ignition on.
Power On/Off
ON
Press and hold the Power button [
A
] to
turn the device on. (If the device does not
turn on, allow the battery to charge for a
few minutes.)
OFF
Press the Power button again to turn the
device off. The device will begin powering
down for 15 seconds. Tap “Suspend Now”
to power the device down immediately.
