Chapter 10: User Options
81
10.4.8.2 Initialize GPS
Resets the unit and reacquires the satellite signal. Note: Previously saved satellite data will
be reset and reacquiring the satellite signal may take 15 minutes or more.
10.4.8.3 Set GPS Position
Enables you to manually set the location of the current position icon. If you have traveled a
long distance with the unit off, it may take some time for the unit to reacquire a satellite
signal. By manually setting the position of the unit you are telling the unit where you are
and will speed up the satellite signal acquisition. There are two options for setting the GPS
position:
10.4.8.3.1 Search by Street
This function enables you enter a specific address by which to set the GPS position. Select
Search by Street
.
If only one region is active, the search will be conducted from that region. If more than one
region is active, you will be asked to select the region from which to search.
Enter the base name for the street. For example, if you are searching for “Overland Court”
you would enter “OVERLAND”. As you type, the AutoFill will show the next possible match
from the database. Select
OK
. For additional help with entering street names, see “Help
with Address Entry” on page 18.
Use the navigation key to scroll the list up or down and select the desired street from the
list.
