Magellan RoadMate 1340 - Automotive GPS Receiver, User Manual

Page: 16 / 44

8
Fundamentals
Powering on the Magellan RoadMate receiver
The Power On/Off switch is located on the top of the Magellan RoadMate receiver.
Turning the Magellan RoadMate receiver On
1. Slide the power switch to the left.
2. After the initial splash screen the Warnings screen is displayed. Read and tap .
Turning the Magellan RoadMate receiver Off
1. Slide the power switch to the left to turn the Magellan RoadMate receiver off. You have a 5 second delay to
resume using the receiver if you change your mind.
Volume
Changing the Volume from the Map Screen
1. Tap the speaker/magnifier icon . Additional controls appear.
2. Tap the Mute button to mute the volume, or tap the '+'
or '-' buttons to raise or lower the volume.
3. Tap .
Changing the Volume from Settings
1. Access the Main Menu .
2. Tap the Settings icon .
3. Tap Sound .
4. Tap inside the Master volume adjust bar to change the volume level of the Magellan RoadMate receiver.
5. Tap to save and exit.
Setting Button Sounds on or off
1. Access the Main Menu .
2. Tap the Settings icon .
3. Tap Sound .
4. Tap the check box for Button Sounds. Check to have button sounds played, unchecked to turn them off.
5. Tap to save and exit.
Brightness
Accessing the Brightness Control
1. Access the Main Menu .
2. Tap the Settings icon .
3. Tap System .
4. Tap Brightness .
5. Tap inside the brightness adjust bar to set the desired brightness.
6. Tap to save and exit.
Raises volume
Lowers volume
Mute