manualshive.com logo in svg

Magellan MobileMapper - GPS Software, User Manual

Share
Download
Magellan MobileMapper - GPS Software User Manual Download Page 69

61

Default coordinate

systems:

Primary: Lat/Lon
Secondary: UTM

4. Nav Screens

This option allows you to remove the navigation screens 
that you do not need from the navigation screen sequence 
that you scroll by pressing NAV repeatedly (see page 36).
When selecting this option, you are asked to turn off or on 
each of the available navigation screens. Choose “Off” 
and press ENTER for all these screens that you are not 
currently using. Note that the Map screen cannot be 
turned off. You must cycle through all the screens in order 
to save any changes to the On/Off status of any screen.

5. Coord System

This option allows you to define a primary coordinate sys-
tem, and also a secondary coordinate system if you need 
one.
By defining a coordinate system, you tell MobileMapper 
Pro how the calculated coordinates should be expressed. 
For example, if you choose 

Lat/Lon

, all coordinates will be 

expressed as angles (latitudes and longitudes) and if you 
choose 

UTM

 or any other system, coordinates will all be 

distances (Northings and Eastings) from the chosen ori-
gin.
When you select the 

Coord System

 option from the Setup 

menu, MobileMapper Pro asks you to specify which sys-
tem you want to define (primary or secondary). Select it 
and press ENTER. In the list that appears, select the coor-
dinate system you want to use and press ENTER. Depend-
ing on your choice, MobileMapper Pro may then ask you 
additional information:

-

If you select Lat/Lon, you are then asked to select the 
display format (DEG/MIN.MMM, DEG/MIN/SEC.SS, 
etc.)

Summary of Contents for MobileMapper - GPS Software































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands