13
to
> System > Storage Allocation
to allocate storage for Parking recording.
Changing the allocation will erase the memory card, so save any videos or photos
to your computer first.
When Parking mode detection is enabled, the system will enter Parking mode
when you:
- disconnect the device's power (e.g. the vehicle engine is stopped or the power
cable is disconnected) or when the car stops moving for about 5 minutes*; or
- press
to manually start Parking mode while Continuous recording is in
progress.
* The feature is triggered by the G sensor of the device. You can change the configuration by selecting
> Parking Mode > Auto Entry
.
To stop Parking mode and resume Continuous recording, press
.
If movements were detected and recorded during Parking mode, you will be
asked to playback the video when you stop Parking mode.
Parking recordings are saved to the
Parking
category for file playback.
Camera mode.
Your dashcam allows you to take photos.
- If a recording is in progress, press
to take a photo*.
- Press
> Camera >
.
* This function is not available when the rear camera is connected.
Photos are saved to the
Photo
category for file playback.
