34
User Guide
Access System Features by Phone
Due to Magellan’s voice-assisted remote features, any touch-tone telephone can be turned into a keypad. Arm/disarm Magellan,
activate/deactivate Magellan’s PGM outputs, record/listen to messages and even turn Magellan into a speakerphone all via your
telephone. Using detailed voice prompts to guide your way, remote access to your Magellan system is as easy as picking up the
telephone.
Please note the following:
•
The following instructions pertain to entering commands and/or data through your telephone’s keypad. Therefore, whenever you are
instructed to perform an action and/or enter data, do so on your telephone’s keypad.
•
Magellan will automatically hang up if no action is performed after 2 minutes.
•
Press the
[
4
]
key at anytime to exit and have Magellan hang up.
•
When Magellan is in speakerphone mode, key
[16]
from the center keypad will flash rapidly.
Step 1: Call Magellan from any touch-tone telephone
If there is no answering service or machine, simply pick up your telephone and dial the number of the telephone line that
your Magellan console is connected to (usually your home number). If the telephone line that Magellan is connected to is
shared with an answering service or answering machine, you have to override the answering service or machine. To
override the answering service or machine:
Step 2: Enter your user code
Use the same user code that you use with the Magellan console.
Call
Magellan,
wait one or
two rings
and then
hang up
Wait 10
seconds
Call Magellan
again
Technical Manuals Online! - http://www.tech-man.com
Technical Manuals Online! - http://www.tech-man.com
