Magellan GiS explorist Pro 10, User Manual

Page: 16 / 27

Setup
Magellan eXplorist Pro 10 GPS Receiver 6
Language Selection
Some versions of the eXplorist Pro 10 support languages other than English. If the version you have supports
other languages you will be prompted to select the language when you turn the eXplorist Pro 10 on for the first time
CAUTION: The selection of the language is irreversable. Once a language has been selected it
cannot be changed.
Selecting Language
1. When turning the receiver on for the first time you
may be prompted to select the language to be used
for the device and its applications.
2. If prompted, use the side buttons (A and B) to
highlight the desired language.
3. Once the language is highlighted, press the Power
button (C) to accept the language.
NOTE: If you are unsure what language to select,
press and hold the Power button (C) for 3 seconds. The
receiver will turn off without a language selected and
you will be prompted again the next time the receiver is
turned on.