Assembly Instructions
Page 6 of 8
FIGURE 9
FIGURE 8
FIGURE 7
Step 3:
●
Hook the S-hook at the bottom of the rainfly
to the D-ring at the bottom of the tent body.
(Fig.7)
●
Your tent should be standing up completely.
You can now easily move your tent to its
final position before securing with stakes and
guylines.
8
9
Four corners and six sides
NOTE
:
When taking down tent, ensure to unplug USB.
Press buttons on switch
box located at the inside
of tent to turn on/off
lighting. (low/Medium/high)
Load 3D batteries to
empty battery pack.
(Batteries not included)
Slide battery pack into
mesh pocket located
at the inside of tent.
Then plug in battery
pack cord into lighting
connector.
D
D
D
Lighting Component For Tent
Lighting Component For Gear Loft
Slide battery pack into
pocket located at the
inside of tent.
Velcro up pouch, then plug in battery pack
cord into lighting connector.
Press buttons on switch box located at the
inside of tent to turn on/off the lighting.
AA
AA
AA
Load 3AA batteries to
empty battery pack.
(Batteries not included)