Assembly Instructions
5.
Pitch tent with all steel poles one end
insert into the plastic hub, another end
with the pin on the pin&ring insert into,
(make sure the wire ring on the steel
pole near to plastic hub when install
the steel pole). Refer to image 1&2.
6.
Insert the fiberglass pole C into the
pole sleeve on front porch. Arch the
pole and insert pin on the bottom into
both end pole ferrel, attached the “G”
hook on the pole. Refer to image 3&4.
7.
Secure the inner tent into ground with
pegs. Refer to image 3.
8.
Place the rainfly on the inner tent and
fix on inner tent with “S” hook on the
wire ring which is fixed on the steel
pole. Refer to image 1.
9.
Front two corner with the “S” hook
hooks on the loop. Refer to image 2.
10.
Release the guy rope pre-attached on
rainfly. To secure the guy ropes, find
the guy rope plastic slider and look for
the portion of the guy rope opposite the
knot. Pull this portion, forming a loop
(works like a slip knot).Extend guy rope
to ground and peg down. Refer to
Image 3.
Image 2
Image 1
Image 1
Image 3
Image 3
Image 4
Image 2
