MAGBEAST 5, Safety Instructions And Operator'S Manual

Page: 3 / 17

MAGBEAST 5
Operator’s manual for MAGBEAST 5 Drilling Machine
- 3 -
17. Outdoor Use Extension Cords
When tool is used outdoors, use only extension cords intended for use outdoors and so
marked.
18. Stay Alert (Do not use when taking medications that may cause drowsiness.)
Watch what you are doing. Use common sense. Do not operate tool when you are tired.
19. Check Damaged Parts
Before further use of the tool, a guard or other part that is damaged should be carefully
checked to determine that it operates properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other
conditions that may effect its operation. A guard or other part that is damaged should be
properly repaired or replaced by an
authorized service centre. Do not use this tool if
switches do not turn it on and off. Have defective switches replaced by authorized
service centre.
WARNING: SPECIAL INSTRUCTIONS
1. Read and follow operator's manual thoroughly. If you cannot locate your operator's manual
FAX JEI Solutions LTD at 00 44 1706 830496 for an additional
FREE copy.
2. DO NOT touch rotating cutter or parts.
3. Always stop machine completely and unplug from power source before changing cutters,
cleaning clips, refilling lubrication or performing adjustments.
4. Never wear loose clothing or gloves when working near cutting area or machine arbor.
5. Always wear eye protection. Any tool can shatter.
6. Always use safety chain or strap provided with machine.
7. Always use proper tooling, keep cutters securely fastened.
8. DO NOT use dull or broken cutters.
9. Beware of ejected slugs at end of cut, they become HOT during the cut.
10. Magnet will not hold properly on thin materials under 3/8" (9.5mm), rough or dirty surfaces.
11. Keep all safety features functioning and working properly.
12. Keep bottom of magnet burr free and clear of chips and debris.
13. To reduce the risk of electrical shock, DO NOT remove or alt er electrical panels or use
machine in damp areas.
14. Use only authorized service centres for repairs.
Grounding Instructions
Warning! READ ALL INSTRUCTIONS
MAGBEAST 5 drilling machine must be connected to "protected power source" which is properly
grounded.
Improperly connecting the grounding wire can result in the risk of electrical shock. Check with a
qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify
the plug provided with the tool. Never remove the grounding prong from the plug. Do not use tool if
the cord or plug is damaged, have it repaired before using. If the plug will not fit the outlet, have a
proper outlet installed by a qualified electrician. The MAGBEAST 5 must be plugged into an
appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. If in
doubt of proper grounding, call a qualified electrician.