16
Z Series User Manual rev 2.10
in
fo@mag-audio
.c
om
Tel./F
ax:
+
38 044 277
-4
7-89
www
.mag-audio.com
5.9.1. Mains connection.
Z series powered systems are supplied with CN-0010 PowerCon-E/F CEE 7/7 mains cable (part number
0204000003). Use only original or supplied by manufacturer mains cables!
Z series powered systems are equipped with PowerCon B mains power outlets for mains link to
additional Z series powered system.
Z series systems’ nominal mains power specifications: AC 220V, 50/60 Hz.
Nominal voltage tolerance: 100 - 250 V.
To power up the system, connect the mains cable to the system, then to the power outlet.
To completely power down the system, disconnect the mains cable from the power outlet.
5.9.2. Signal connections.
Z series systems are equipped with XLR INPUT an XLR LINK connectors for signal connection.
Use of balanced XLR connector cables is recommended. In case when balanced XLR connections are not
available, unbalanced XLR connection is acceptable.
For linking the additional system to the same signal bus LINK connector may be used.
1
2
3
Shield (Ground)
Plus (+)
Minus (-)
Balanced XLR Plug connections
1
2
3
Shield (Ground)
Plus (+)
Shield (Ground)
Unbalanced XLR Plug connections
XLR-XLR cable
XLR-XLR cable
Z series powered
full-range system
Z series powered
full-range system
Z series powered
subwoofer
Z series powered
subwoofer
XLR-XLR cable
XLR-XLR cable
To signal source
Z series powered connection diagram
Amplifier controls.
Use several available Z
series speaker system’s amplifier controls
to set up the entire system:
BT/User EQ
(full-range system): Enables
BlueTooth controls for BlueTooth enabled
versions. Engages HF boost filter for
farfiled applications for versions without
BlueTooth support.
NORMAL/MONITOR MODE.
(full-range
system): Provides additional microphone
feedback suppression for more
performance comfort while using as stage
monitor.
HPF
(full-range system): Provides high-
pass filter to seamlessly couple the full-
range system with powered subwoofer.
BT/User EQ
(subwoofers): Engages
BlueTooth controls on BlueTooth enabled
versions. Engages custom LF boost to add
more “kick“ to the system performance.
PHASE
(subwoofers): Switches the polarity
of the subwoofer for better coupling
with the full-range systems for different
applications.
LPF
(subwoofers): Provides low-pass filter
to seamlessly couple the subwoofer with
powered full-range system.