A A / A A A F l a s h l i g h t
MM Rev.1 8/03
9
421-000-439
STEP 12
Replace the HEAD ASSEMBLY (1)
STEP 13
Before installing the BATTERIES, check for
leakage or corrosion. Reinstall or replace the
BATTERIES, (two ‘AA/AAA’ series alkaline
only) install with the positive (+) end toward
the lamp. Reinstall TAIL CAP (20). *Note:
always make sure the TAIL CAP (20) is tight
for good positive electrical contact.
NOTICE: Replace o-ring style TAIL CAP (20)
with new LIP SEAL (21) and TAIL CAP (22).
ALL VISIBLE SEALS (6, 10 & 19) SHOULD HAVE A LIGHT
COAT OF OIL ON THEM. IF NOT, LIGHTLY COAT WITH
SUPER LUBE GREASE.
BATTERY LEAKAGE
Mag Instrument’s flashlight warranty does not cover battery leakage unless the
batteries involved are Rayovac, Eveready or Duracell.
If the batteries are one of the three, the WSC may exchange the flashlight for a
new replacement. If the WSC is unable to determine which type of battery is in the
flashlight then they may assume it is one of the above batteries and make the
exchange.
If a flashlight has evidence of a battery leak but the batteries have been removed
and not accompanying the flashlight the warranty is void.
All battery leaks caused by any other battery are not covered by Mags warranty
and the customer may exchange their flashlight for a new one at the exchange fee
per the WSC price schedule or, the WSC may advise the customer to contact the
particular battery manufacturer for further instructions.