English
3
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
EC-Declaration of Conformity
Machinery Directive
Sub-Compact Drill/Driver
MCD701
Mac Tools declares that these products described under
Technical Data
are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-1:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact Mac Tools at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Mac Tools.
Markus Rompel
Vice-President Engineering, PTE-Europa
Mac Tools, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
17.03.2019
WARNING:
To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER:
Indicates an imminently hazardous
situation which, if not avoided,
will
result in
death or
serious injury
.
WARNING:
Indicates a potentially hazardous situation
which, if not avoided,
could
result in
death or
serious injury
.
CAUTION:
Indicates a potentially hazardous situation
which, if not avoided,
may
result in
minor or
moderate injury
.
NOTICE:
Indicates a practice
not related to
personal injury
which, if not avoided,
may
result in
property damage
.
Congratulations!
You have chosen a Mac Tools tool. Years of experience,
thorough product development and innovation make
Mac Tools one of the most reliable partners for professional
power tool users.
Technical Data
MCD701
Voltage
V
DC
12
Type
1
Battery type
Li-Ion
Power output
W
250
No-load speed
1st gear
2nd gear
min
-1
min
-1
0–425
0–1500
Max. Torque (hard/soft)
Nm
57.5/23.5
Chuck capacity
mm
10
Maximum
drilling
capacity
Wood
Metal
mm
mm
20
10
Weight (without battery pack)
kg
0.94
Noise values and/or vibration values (triax vector sum) according to
EN60745-2-1:
L
PA
(emission sound pressure level)
dB(A)
72
L
WA
(sound power level)
dB(A)
83
K (uncertainty for the given sound level)
dB(A)
3
Drilling into metal
Vibration emission value a
h,D
=
m/s
2
2.5
Uncertainty K =
m/s
2
1.5
Screwdriving
Vibration emission value a
h
=
m/s
2
< 2.5
Uncertainty K =
m/s
2
1.5
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN60745 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.
WARNING:
The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
English (original instructions)
SUB-COMPACT DRILL/DRIVER
MCD701
