AIR Series User Manual rev 1.00
in
fo@mag-audio
.c
om
Tel./F
ax:
+
38 044 277
-4
7-89
www
.mag-audio.com
12
AIR series speaker’s connection plate
1. LABEL FIELD: Name of the system, along with its
basic parameters is noted here.
2. SERIAL NUMBER FIELD: Sticker with the systems
serial number is located here. NEVER REMOVE
THE SERIAL FROM THE SYSTEM, AS IT IS AN
IMMEDIATE WARRANTY VOID.
3. INPUTS TERMINAL: The pair of screw terminals.
Use this connectors to connect power amplifier and
to feed the signal to the parallel system (optional).
AIR series passive connection diagram
5.6.1. Passive connections
Use power amplifier with DSP or power amplifiers
with external speaker processor with AIR series
systems.
MAKE SURE TO USE HIGH PASS FILTER FOR ALL
AIR SERIES SYSTEMS TO PREVENT EXCESSIVE
CONE MOVEMENT, RESULTING IN TRANSDUCER
DAMAGE OR FAST DETERIORATION.
Recommended HPF settings, suggested power
amplifier ratings, and connection pins are found in
the table below:
System
Amplifier power
Amplifier impedance
Connection pins
Recommended HPF
AIR-62-8
150 - 300 W
8 Ohm
+ terminal -1 terminal
80 Hz or higher, 18 dB/oct min
AIR-62-16
150 - 300 W
16 Ohm
+ terminal -1 terminal
80 Hz or higher, 18 dB/oct min
AIR-82-8
250 - 500 W
8 Ohm
+ terminal -1 terminal
60 Hz or higher, 18 dB/oct min
AIR-82-16
250 - 500 W
16 Ohm
+ terminal -1 terminal
60 Hz or higher, 18 dB/oct min
AIR-122-8
300 - 600 W
8 Ohm
+ terminal -1 terminal
50 Hz or higher, 18 dB/oct min
AIR-122-16
300 - 600 W
16 Ohm
+ terminal -1 terminal
50 Hz or higher, 18 dB/oct min
AIR-152-8
600 - 1200 W
8 Ohm
+ terminal -1 terminal
45 Hz or higher, 18 dB/oct min
AIR-210-4
850 - 1700 W
4 Ohm
+ terminal -1 terminal
50 Hz or higher, 18 dB/oct min
AIR-210-8
850 - 1700 W
8 Ohm
+ terminal -1 terminal
50 Hz or higher, 18 dB/oct min
1
3
2
5.6. Passive speakers
DSP AMPLIFIER
Speakon-2 wire cable
Speakon-2 wire cable
Speakon-2 wire
cable
Speakon-2 wire
cable
AIR series system
AIR series system
AIR series system
AIR series system
