background image

Fly Series User Manual rev 1.21

22

 

                                           in

fo@mag-audio

.c

om

Tel./F

ax:

 +

38 044 277

-4

7-89

 

www

.mag-audio.com

8. Warranty and assistance

8.2. Assistance

There are no user-serviceable parts in your 

 

device. Refer servicing to qualified technical 

personnel. In addition to in-house service 

department, MAG Audio supports the chain of 

distributors, authorized in repairs and service. If 

your device needs repair contact your MAG Audio 

dealer or distributor.

Occasionally, due to the nature of the failure, it 

might be necessary to return defective products to 

MAG Audio for repair. In this case, before shipping, 

please kindly contact your MAG Audio distributor or 

dealer, or MAG Audio directly. You will be provided 

the RMA number code and detailed instructions 

regarding your particular case. Please do not send 

products without a prior authorization.

Thank you for your understanding, cooperation and 

choice of MAG Audio products.

8.1. Product warranty

1. By this warranty MAG Audio grants that all 

equipment manufactured under the MAG Audio 

trademark is free from defects in material, 

components and factory workmanship under 

the normal use and maintenance for the time as 

specified below.

2. All warranty repairs and maintenance of MAG 

Audio products shall be carried out at MAG Audio 

production sites or by MAG Audio authorized 

personnel at no cost for the product purchaser.

3. Warranty period for cone transducers, high 

frequency drivers and crossovers, whether sold 

separately or as a component of a speaker system, 

is 60 months from the production date.

4. Warranty period for enclosures, grills, connection 

plates and accessories, whether sold separately or 

as a component of a speaker system, is 60 months 

from the production date.

5. Warranty period for built-in power amplifiers, 

whether sold separately or as a component of a 

speaker system, is 36 months from the production 

date.

6. Warranty repairs or maintenance will be 

performed only if a) MAG Audio product was 

purchased from an official MAG Audio distributor 

/ dealer and b) warranty card with specified serial 

number, production date, realization date, vendor’s 

signature and stamp is presented.

7. Warranty shall not cover following: damage 

caused by accident, misuse or failure to follow 

exploitation rules stated in technical manual; 

repairs performed by non-authorized personnel; 

mechanical damage caused by shipping accidents 

and normal tear and wear.

8. Warranty shall not be applicable to any product 

with defaced, removed, or modified serial number.

9. If your MAG Audio product needs repairs or 

maintenance, contact your official MAG Audio 

distributor / dealer. Please do not ship your MAG 

Audio product without prior authorization.

Summary of Contents for 00-00001300

























Reviews: