Mafell LO 55, Translation Of The Original Operating Instructions

Page: 22 / 198

-22-
2.3 Technical data
Operating voltage 230 V~
Mains frequency 50 Hz
Input power continuous operation 1100 W
Idling speed normal operation 10000 - 24000 rpm
Idling speed throttled operation 10000 - 16500 rpm
Speed cooling run 8000 rpm
Milling depth adjustment with fine adjustment 0 - 55 mm
Revolving depth stop 3-stage
Tool fastening with collets Ø 6 – 8 mm
Hose connector diameter 26 mm
Weight without mains cable 3.1 kg
2.4 Emissions
The declared noise emission values have been measured in accordance with DIN EN 62841-1 and may be used
for comparing the tool with another and also in a preliminary assessment of exposure.
Danger
The noise emissions during actual use of the power tool can differ from the declared
values depending on the ways in which the tool is used especially what kind of
workpiece is processed.
Always wear hearing protection, even when the power tool ist running idle in addition
to the trigger time!
2.4.1 Noise emission specifications
Noise emission values determined according to EN 62841-1 and EN 62841-2-17:
Sound pressure level L
PA
= 97 dB (A)
Uncertainty K
PA
= 3 dB (A)
Sound power level L
PA
= 89 dB (A)
Uncertainty K
PA
= 3 dB (A)
The noise level measurement was carried out with a new straight-edged milling cutter (Ø 12 mm).
2.4.2 Vibration specifications
The typical hand-arm vibration is 2.9 m/s 2 .
The measuring inaccuracy is 1.5 m/s 2 .
2.5 Scope of supply
Router LO 55 complete with:
1 parallel guide fence
1 fine adjustment
1 chip deflector
1 template guide Ø 20 mm, Ø 30 mm, Ø 40 mm