-21-
2.3
Technical data
Nominal voltage
18 V
Saw blade speed while idling
6700
rpm
Cutting depth 0º/45º
42/29 mm (1 21/32, 1 9/64 in.)
Tilting saw unit
0 – 45º
Saw blade diameter max/min
122/112 mm (4 51/64, 4 13/32 in.)
Saw blade body thickness
1.2 mm (3/64 in.)
Tool cutting width
1.8 mm (0.070 in.)
Saw blade mounting hole
20 mm
Hose connector diameter
28 mm (1 7/64 in.)
Weight with rechargeable battery, without parallel stop
2.8 kg (6.2 lbs)
Dimensions incl. guide assembly (W x L x H)
200 x 580 x 200 mm (7 7/8 x 21 21/32 x 7 7/8
in.)
as cross-cutting system
Cutting depth 0°/45°
40/27 mm (1 9/16, 1 1/16 in.)
Cutting length at 12/40 mm workpiece thickness
337/292 mm (13 ¼, 11 ½ in.)
Weight with rechargeable battery and guide assembly
3.6 kg (7.9 lbs)
2.4
Emissions
The values stated are emission levels. Although there is a correlation between emission and imission level, it
cannot be reliably derived from this whether additional precautions are necessary. Factors influencing the
current immission level existing at the workplace comprise the duration of exposure, the room characteristic,
other sources of noise, etc. such as e.g. the number of machines and other adjacent machining operations. In
addition, the permissible immission level may differ from country to country. This information is nevertheless
suitable for providing the machine user with an improved assessment of the hazard and risk.
2.4.1
Noise emission specifications
Noise emission values determined according to EN 62841:
Sound pressure level
L
PA
= 92 dB (A)
Uncertainty
K
PA
= 1,5 dB (A)
Sound power level
L
PA
= 103 dB (A)
Uncertainty
K
PA
= 1,5 dB (A)
The noise measurement was recorded using the saw blade included in the standard equipment.
2.4.2
Vibration specifications
The typical hand-arm vibration is less than 2.5 m/s
2
.
2.5
Scope of supply
Cross-cutting system KSS40 18 M bl complete with:
1 carbide-tipped circular saw blade Ø 120 mm (4 ¾ in.), 24 teeth
1 riving knife/splitter (thickness 1.2 mm / 3/64 in.)
1 hose connector
1 parallel stop
1 service tool in bracket on the machine
