![background image](http://html2.mh-extra.com/html/mafell/kss40-18-m-bl/kss40-18-m-bl_operating-safety-instructions-manual_3414987017.webp)
KSS40 18 M bl
01/2022
17
4.4
Chip extraction
Caution
Health hazards from wood dust
The dusts produced during work can be inhaled and can cause health damage.
➢
Harmful dust must be extracted with a HEPA 13 dust extractor.
➢
Wear a dust mask during work.
For all work that produces a significant amount of dust, connect the machine to a suitable external extraction
device. The air velocity must be at least 20 m/s [65 ft/sec].
The outside diameter of the hose connector is 28 mm [1.1 in].
For short-time work that generates a small amount of dust, you can use the shavings bag provided as a self-
suction device.
4.5
Saw blade selection
To achieve good cutting quality, use a sharp tool and select a tool from the following list that is appropriate for
material and application:
Cutting softwood and hardwood across and along the grain direction:
-
Carbide circular saw blade Ø 120 x 1.8 x 20 mm, 24 teeth [Ø 4.72 x 0.07 x 0.79 in]
Cutting softwood and hardwood especially along the grain direction:
-
Carbide circular saw blade Ø 120 x 1.8 x 20 mm, 12 teeth [Ø 4.72 x 0.07 x 0.79 in]
Cutting softwood and hardwood especially across the grain direction:
-
Carbide circular saw blade Ø 120 x 1.8 x 20 mm, 40 teeth [Ø 4.72 x 0.07 x 0.79 in]
Cutting laminate:
-
Carbide circular saw blade Ø 120 x 1.8 x 20 mm, 40 teeth [Ø 4.72 x 0.07 x 0.79 in]
Cutting wood fiber insulation material:
-
Carbide circular saw blade Ø 120 x 1.8 x 20 mm, 40 teeth [Ø 4.72 x 0.07 x 0.79 in]
Cutting plastic material (styrofoam):
-
Carbide circular saw blade Ø 120 x 1.8 x 20 mm, 24 teeth [Ø 4.72 x 0.07 x 0.79 in]