-19-
2.3 Technical data
Nominal voltage
36 V
Saw blade speed while idling
3300
rpm
Saw blade speed at normal load
2600
rpm
Cutting depth 0 /30 /45
66 / 62 / 53 mm
Tilting saw unit
0º – 45º
Saw blade diameter max/min
185 /172 mm
Saw blade body thickness
1.4 mm (6 1/4 in./5 3/4 in.)
Tool cutting width
2.4 mm (6 1/4 in./5 3/4 in.)
Saw blade mounting hole
20 mm
Hose connector diameter
35 mm (1 3/8 in.)
Weight with rechargeable battery and guide rail
(without parallel stop)
6.6 kg (6.2 lbs)
Dimensions (W x L x H)
257x769x277 mm
2.4 Noise emission specifications
Noise emission values determined according to EN 60745-1 and EN 60745-2-5:
Sound power level
Workplace-related emission value
Idling
102 dB (A)
91 dB (A)
Machining
99 dB (A)
88 dB (A)
The noise measurement was recorded using the saw blade included in the standard equipment.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.
2.5 Vibration specifications
The typical hand-arm vibration is less than 2.5 m/s
2
.
2.6 Scope of supply
Cross-cutting system KSS 60 36B complete with:
1 carbide-tipped circular saw blade Ø 185 mm (6 1/4 in.), 32 teeth
1 riving knife / splitter (thickness 1.5 mm/1/16 in.)
1 service tool in bracket on the machine
1 carrying case
1 operating manual
1 folder "Safety Instructions"
1 parallel stop
1 charger APS 36
2 batteries 36V / 2.6 Ah