-18-
2.3 Technical data
Universal motor, radio and TV
interference suppressed
230 V~, 50 Hz
110 V~, 50 Hz
120 V~, 60 Hz
Power input (nominal load)
2300 W
Current at nominal load
10,8 A
17 A
17 A
Saw blade speed while idling
2250 - 4400 rpm
Saw blade speed at normal load
2000 - 3300 rpm
Cutting depth 0°/30°/45°/60°
88/75/61/44 mm (3 15/32 in., 2 61/64 in., 2 13/32 in., 1 47/64 in.)
Tilting saw unit
0°– 60°
Saw blade diameter max/min
237/220 mm (9 21/64 in./8 21/32 in.)
Saw blade body thickness
2.0 mm (5/64 in.)
Tool cutting width
2.5 mm (3/32 in.)
Saw blade mounting hole
30 mm (1 23/128 in.)
Hose connector diameter
35 mm (1 3/8 in.)
Weight without mains cable, without
parallel guide fence
7.3 kg (16.1 lbs)
Dimensions (W x L x H)
270 x 414 x 305 mm (10 5/8 x 16 19/64 x 12 in.)
as cross-cutting system
Cutting depth 0°/30°/45°/60°
82/69/55/38 mm (3 7/32 in., 2 23/32 in., 2 5/32 in., 1 3/16 in.)
Cutting length at 80 mm workpiece
thickness
370 mm (14 9/16 in.)
Weight with guiding device, without
mains cable
8,3 kg (18.3 lbs)
Dimensions incl. guide assembly (W
x L x H)
295 x 810 x 305 mm (11 5/8 x 31 7/8 x 12 in.)
2.4 Noise emission specifications
Noise emission values determined according to EN 60745-1 and EN 60745-2-5:
Sound power level
Workplace-related emission value
Machining
102 dB (A)
91 dB (A)
The noise measurement was recorded using the saw blade included in the standard equipment.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.
2.5 Vibration specifications
The typical hand-arm vibration is less than 2.5 m/s
2
.
2.6 Scope of supply
Cross-Cutting System KSS80Ec/370 complete with:
1 carbide-tipped circular saw blade Ø 237 mm (6 1/4 in.), 12 teeth
1 riving knife / splitter (thickness 2.0 mm/3.32 in.)
1 parallel stop
1 service tool in bracket on the machine
1 operating manual
1 folder “Safety Instructions”
