MAEVING RM1, Owner'S Handbook Manual

Page: 22 / 84

Maeving
|
RM1 Owner’s Handbook 22
GENERAL INFORMATION
Ignition switch
The ignition switch has three positions,
activated by inserting the ignition key.
1. LOCK.
2. OFF.
3. ON.
Always remove the ignition key when the
motorcycle is parked, to reduce the chance
of theft. The ignition key can be removed
from the ignition barrel when the key is set
to either
LOCK or OFF .
OFF position
The OFF position is used to turn the
motorcycle off, disabling the electrical
system. The handlebars do not lock into
position and the motorcycle can be moved
freely.
ON position
The ON position activates the motorcycle
and enables the following:
• Instrument panel display turns on.
• Front and rear lights turn on.
With the motorcycle on the side stand, insert
the ignition key and turn it clockwise to the
ON position, to turn the motorcycle on.
Note : The driving mode cannot be
selected with the side stand down.
Caution : Do not leave the ignition
switch in the ON position for
extended periods of time, or unless
you are intending to ride the
motorcycle. This may cause damage
to electrical components and will
discharge the 12-volt battery and/or
the primary and secondary batteries.
Steering lock
The steering lock secures the motorcycle
steering in a locked position.
Engaging the steering lock
1. Turn the handlebars fully to the left.
2. With the ignition key in the
OFF
position, turn the ignition anti-
clockwise to the
LOCK position whilst
fractionally moving the handlebars to
engage the steering lock.
3. Remove the ignition key from the
ignition barrel and confirm the
steering lock has engaged.
Disengaging the steering lock
1. Insert the ignition key into the ignition
barrel.
2. Turn the ignition key to the OFF
position.
3. The steering lock disengages and the
handlebars move freely from left to
right.
! ! !
! ! !
2
1
3