13
C
HILD LOCK
The lock prevents unsupervised operation by children.
To set: In standby mode, press and hold STOP button for 3 seconds, the oven will automatically enter child lock mode and the
lock indicator light will turn on. In the lock state, all buttons are disabled.
To cancel the child proof lock: In child lock mode, press and hold STOP button for 3 seconds, the system will return to standby
mode the display will show "0".
F
AILURE DIAGNOSIS
Failure
Possible reasons
An error sign “E-01” display.
VPC1 frequency conversion failure.
An error sign “E-02” display.
VPC2 frequency conversion failure.
An error sign “E-05” display.
VPC1 temperature sensor open circuit alarm.
An error sign “E-06” display.
VPC1 temperature sensor short circuit alarm.
An error sign “E-07” display.
VPC2 temperature sensor open circuit alarm.
An error sign “E-08” display.
VPC2 temperature sensor short circuit alarm.
An error sign “FOOD” display.
No load high temperature alarm.
An error sign “FALL” display.
Button adhesion alarm.
Please contact an Authorised Service Agent for assistance.
F
ILTER CLEANING
The front filter serves as the air inlet, the filter should be cleaned regularly depending on the kitchen conditions.
1.
Turn the two screws fixing the filter screen assembly anticlockwise, remove the filter screen assembly after loosening the
screws; and wash it in warm soap and water; rinse, sanitize, allow to dry.
2.
Install the screen assembly and tighten the screws clockwise.
3.
Make sure that the filter screen assembly is installed before using the microwave oven.