Maestro MR808, Owner'S Manual

Page: 6 / 40

6
5. Install the feeding tube. When it is installed downwards, the marking point on
feeding tube shall align with that on the squeezing cup. Make “mark” of feeding
tube rotate towards the “mark” on squeezing cup in clockwise direction and lock
(Picture 6).
6. See the figure. Make the two juice/marc cups put at the appropriate position: one is used
to receive juice, and another is used to receive marc (Picture 7).
Connect power plug to the mains.
Now your juicer is ready to work.
Instructions for use
Turn on the switch
(forward) (Picture 8).
Forward: Make fruits
and vegetables
pushed downwards for
squeezing.
Reverse: Fruits and
vegetables return
upwards. (Picture 9).
Notes: Please don’t
operate switch with wet
hands.
After the squeezing process is completed, please press the stop switch, and pull out the
power plug.
Notes: Please use fresh fruits and vegetables to make the juice. The stale fruits and
vegetables that have been stored in refrigerator for a long time shall be used after
being immersed in cold water for over10min. The kernel of fruits must be removed.
Reverse function
If the machine stops suddenly during operation, press off firstly, and then press the
“reverse” button to make the materials in the auger pushed upwards; and then press
“forward” button (repeat the process for about 3 times).
During “reverse” of the machine, please use hands to press the feed tube slightly (prevent
loosening of the cover).
If the juicer still does not run after the aforesaid operation, please disassemble the
squeezing cup for cleaning, and then try the juicer again.
The hard materials (such as carrot) must be cut into strips, otherwise hard materials maybe
damage juicer.
Notes for use
* Please read the following contents before use.
EN
Pic. 8 Рiс. 9