Maestro MR600, Owner'S Manual

Page: 9 / 44

9
After use, press the switch button when the vacuum cleaner
turns off, unplug the power cord.
Press the cord reel button and the cord will automatically enter
the vacuum cleaner body. While reeling on, gently hold the cord to
prevent the plug from hitting the vacuum cleaner body.
If the cord does not fully come or stopped, pull it out slightly and
press the button again. If the cord is still not completely reeled on, it
is recommended to pull it to the yellow mark and repeat the reeling
on procedure.
Select the conductor suitable for the surface.
ATTENTION! Before changing the conductors, the vacuum cleaner
should be switched off.
Universal conductor - “Floor-Carpet” brush
With its help, you can clean both hard and smooth floor surfaces
and objects, as well as fleecy, such as carpets and similar
coverings.
The conductor has a switch with which the brush is pulled out or
retracted and can be easily and quickly adapted for the required
cleaning conditions.
For smooth floors, the use of a brush is effective, for cleaning
carpets, it is better to retracted the brush inside the conductor.
(Fig.7, Fig.8).
Fig.7 Fig.8
EN