Maestro MR206, Owner'S Manual

Page: 7 / 40

7
- Unwind the power cord completely.
ATTENTION! A small quantity of smoke or a specific smell may
appear after the first switching on as the result of conservation
materials contact with heating element. This is a normal
phenomenon and it shall disappear after several minutes of
operation.
open the handle (E/Pic.1), until the folding mechanism gets in to
the lock position (С/Pic.1).
- Before switching on the hairdryer to the power supply, make sure
that the device switch (A / Pic.1) is set to “0” (oFF).
- Connect the device to the power supply.
- Choose the desired operating mode by the Switch (A /Pic.1):
CAUTION: If the hairdryer stopped its work for an unknown reason,
just set the switch A to position “0” off and unplug the device.
Let it cool down. Then check the air intake grille, and in case of
contamination clean it or hold the hairdryer a little further away from
the hair while operation.
EN
Position
of the switch
Designations Function
А0 0 (oFF) - the device is switched off
A «C» С CooL mode (Cold air)
Enabling CooL mode significantly
reduces the temperature of the
air and contributes to the rapid cooling
of the hair.
А1 1 First rate uses half of the power of the
device, used for delicate hair drying
and for modeling.
А2 2 The second speed includes the entire
capacity of the device and is used for
rapid hair drying.