- Place the support on a dry, even, stable surface.
CAuTION!
Is required on surfaces where heat may cause a problem – an insulated heat pad is recommended.
- Connect the plug to the mains.
- Remove the kettle from the support.
- Press the button to open the cover, the cover will open.
- Fill the kettle with cold water up to the mark «MAX». Close the cover (until it clicks).
- Place the kettle on the support.
- Turn the switch (C/ Fig.1) to the position «I». The indicator will light signaling that the device has turned on, and the kettle shall
begin warming the water.
- When the water begins to boil, the switch will be turned to the position «О» (off), the light will fade and the kettle will be
automatically turned off.
- You must pour out the first portion of water and repeat the boiling procedure again.
- Now the kettle is ready for use.
ATTENTION!
Do not fill the kettle with cold water until cools down; let it get cool before filling with cold water.
Failure to observe this rule may result in the damage to the glass case.
Cleaning and maintenance
Regular cleaning improves the performance of the device.
The quantity and the speed of forming the scale, and consequently, the necessity of cleaning depend on the water hardness in
your region and the intensity of the device usage. All over fur of scale in your kettle is not allowed!
It is recommended to clean the kettle at least 2 times a year but however until the appearance of all over scale.
ATTENTION!
- Never clean a kettle connected to mains.
- Before cleaning, disconnect the kettle and let it cool down.
- Do not use abrasive and aggressive detergents.
- Never submerge the kettle, its support, power line cord and plug in water or other liquids.
Cleaning the kettle from scale
Clean the kettle from scale with special agents sold in the open market. Cleaning from scale can be also performed by the
method described below:
- Fill the kettle to maximal level with a mixture consisting of 1 part of usual vinegar and 2 parts of water. Switch on the kettle and
let is boil and automatically switch off.
- Let the mixture settle during 10-12 hours and pour it out.
- Fill the kettle with fresh water up to maximal level and boil it again. Pour out this water too to remove the smell of vinegar.
-Wash the internal part of the device with clean water, wipe it and dry the kettle.
- Any other kinds of maintenance should be performed by qualified personnel in a servicing center.
Storage
- Switch off the kettle and let it completely cool before storage.
- Wipe and dry the kettle before storage.
- Do not wind the power line cord around the kettle until it is completely cooled down.
- Store the kettle in a cool, dry and clean place beyond the assess of children and people with limited physical and mental
abilities.
Environmental protection
Old appliances contain valuable materials that can be recycled. Please arrange for the proper recycling of old appliances.
Please dispose your old appliances using appropriate collection systems.
Subject to technical modifications!
