Maestro MR 229, Owner'S Manual

Page: 8 / 44

8
- After rolling in the hair section allow the heat to set for few
seconds.
- Unroll your hair section by pressing the roll-out button (B/Picture1).
This releases the brush and it can be rolled out of the curled
section.
- After use, switch off the appliance with the button (C/Picture1) and
pull out the power cord from the wall socket.
CAUTION: If the hairdryer stopped its work for an unknown reason,
just set the switch A to position “0” off and unplug the device.
Let it cool down. Then check the air intake grille, and in case of
contamination clean it or hold the hairdryer a little further away from
the hair while operation.
Maintenance and care
WARNING!
- Before cleaning the appliance in any way, make sure that the
appliance plug is not connected to the socket.
- Always unplug from the plug socket and let it cool down
completely before cleaning.
- Never place it in water or any other liquid.
- Wipe the housing first with a slight wet then with soft dry cloth. Let
it dry completely.
- Regularly clean the intake grille from hair and dust with a small,
soft brush.
- Any other maintenance should be performed by qualified
personnel in the service center.