Maeda MC174 Operator'S Manual Download Page 13

- 11 - 

7. Inspection and Maintenance 

7.1 Legal Inspection 

If a periodic safety inspection is required by the laws and regulations of your country, perform that 

inspection in addition to the inspection items listed below. 

 

1. Verify that all safety devices are operating properly. 

2. Check the hoist accessories, including the hook block, for problems or damage. 

3. Check the structural parts of the machine, including the frame and boom, for cracks, deformation and 

damage. 

4. Check for loose or missing mounting bolts and joints. 

5. Verify that the boom operates properly by stopping, extending, retracting, raising, lowering and 

swinging the boom. 

 

Contact Maeda or a Maeda sales service agency to request inspection and repair service as needed.

 

7.2 Consumables 

Parts for mounting searcher hook are consumption articles.  Replace it at periodic inspection or before it 

reaches abrasion limits.  Replace consumption articles regularly, which shall produce economical use of 

this machine.   Always replace to our genuine item.  Check parts catalog for correct part number for parts 

request. 

[CONSUMABLES LIST]  

Part Replacement 

cycle 

Searcher hook fix bolt M12x35L (4pcs) 

 Every 6 months or when damage, crack, or squash is 

found 

Searcher hook fix nut  
M12x1grade (4pcs)

 

  Every 6 months or when damage, crack, or squash is 

found 

Searcher hook fix washer 
M12x3.2t (high tension)(8pcs)

 

  Every 6 months or when damage, crack, or squash is 

found 

 Items include a halt period. Contact Maeda or a Maeda sales service agency for part replacement 

information. 

 

7.3 Inspection and Maintenance List 

This section only covers searcher hook kit.  For crane body, please refer to “Inspection and Maintenance 

in the MC-174C Operation Manual” and follow its precautions.    

Inspection and maintenance items 

Page 

7.4.1 INSPECTION BEFORE OPERATION 

14 

[CHECKING BEFORE STARTING ENGINE]

 14 

[1] CHECKING BOOM AND BRACKET 

14 

[2] CHECKING SEARCHER HOOK FIX BOLTS 

14 

[3] CHECKING ELECTRICAL WIRING FOR DAMAGE 

14 

[CHECKING AFTER STARTING ENGINE] 

15 

[1] CHECKING FUNCTIONS OF BOOM 

15 

[2] CHECKING MOMENT LIMITER FOR OPERATION

 

(SEARCHER HOOK MODE) 

15 

 

Summary of Contents for MC174


















Reviews: