Madur Sensonic 4000, Manual

Page: 41 / 53

Sensonic 4000 OPERATION
Set or check the averaging time.
 (6.2.5.2)
ENTER
- start the storing, the word ACTIVE appears
DATA
- the measured/calculated values are shown, storage is active
Stopping the continuous storing of results
STORE
- call the STORE menu

and

and - move the cursor to the option BANK S

- open the option BANKS

and

- move the cursor to the line STORE
ENTER
- storage is stopped, the word ACTIVE disappears
6.9.2.1 Banks Table
The option BANKS TABLE provides information about the stored Banks.

and

- move the cursor to the option BANKS TABLE

- select the option BANKS TABLE .
BANKS TABLE
NO. DATE SIZE
1 07.10.96 73
2 09.10.96 180
3 15.10.96 124
4
5
6
7
The column headings have the following meanings:
No . - Bank No. from 1 - 10
Date - Date (DD.MM.YY) - shows when the storage took place
Size . - Bank size - the number of already in the respective Bank stored Blocks
The last bank can be erased in the BANKS TABLE screen ( the Bank must not be active )

and

- move the cursor to the last stored Bank
C
- erase Bank
6.9.2.2 Erasing Banks
The option ERASE BANKS allows to erase all Banks.

and

- move the cursor to ERASE BANKS

- select the option ERASE BANKS