Manual
maMoS
100/200/300/400
Picture 21.
The way of opening the mamos cover.
After the casing has been opened connector's cover must by removed and the
wires which are to be connected should be led to the inside of the device through the
grommets placed on the bottom side of the casing (Picture 22.).
To connect the wire the user should remove about 5-6 mm of insulation of the
wire's ending, slacken the connector screw enough to be able to put the wire's ending in
the connector and screw the connector tight again, so that the wire does not slip out of it.
22
