Manual
maMoS
100/200/300/400
7.3.3.2. Stabilisation of internal temperature
Picture 75.
Analyser settings – Stabilisation of internal temperature
The analyser is capable to stabilise its internal temperature by cooling the temper-
ature down using the fan. This way the electronic components are protected against over-
heating. In section “
Stabilisation of internal temperature”
, one can set:
•
Enable the temperature stabilisation.
•
Set the target temperature that the analyser would try to adjust to. The default Tar -
get temperature is 28°C
•
Set the Regulation hysteresis.
The fan starts when the T
INT
(temperature inside of the analyser) exceeds the value = Tar-
get tempe Regulation hysteresis.
The fan is stopped when the T
INT
drops below the Target temperature.
67