MadStad adjustable brackets are designed to bolt to a curved surface like the
adapter plate included in this kit. The new windshield attaches to the top of the
brackets with M5 Philips truss screws. Loosening the two adjustment knobs
allow you to change the windshield height and tilt without getting off of the
bike, and without any tools.
You will need to remove your factory windshield; it is not adaptable for use
with these brackets.
Bracket Installation:
Your MadStad brackets attach to the mounting plate as shown on page 3. Use the
four M6 x 16 screws with washers and lock nuts as shown in the diagram below.
Summary of Contents for GL1800
Page 4: ......
