How to use the menu system
When you press the
Menu
button, the menu system is shown. The first column is selected: it is shown in gray, and the
selected test protocol is marked up in blue.
•
Use the dial or the arrow buttons to select another test protocol, if needed.
•
Press the soft-button below the next column to select this column, and scroll to any setting you wish to view or
change.
How to change test settings
1. Start by selecting a protocol.
2. Select the center column.
3. Scroll to the setting you wish to view or change.
4. Select the right-hand column to change the setting.
5. Scroll to the value you wish to use and press the
Select
soft-button.
6. Repeat steps 2 to 5 to change other settings, if needed.
Using test settings temporarily
•
If you only wish to use the changed protocol settings temporarily, select the left-hand column, scroll to
Apply Tem-
porarily
and press the
OK
soft-button. This will exit the menu system.
Saving test settings in the protocol
Before you can save test settings in the protocol, you must unlock the protocol: Select
Device Settings..
>
Protocol Set-
tings
, and set to
Allowed
. If you switch off Zodiac after changing and saving the test settings, the protocol will be locked
again.
•
If you wish to save the changed protocol settings permanently, select the left-hand column, scroll to
Save to [Protocol
name]
, and press the
Save
soft-button.
Canceling changed test settings
•
If you wish to cancel the settings you have changed, select the protocol and press the
Reload
soft-button.
8
Special tests
Zodiac can perform a number of special immittance tests, such as ETF-P and Manual Tympanometry.
These tests are described in detail in the Zodiac Reference Manual.
Accessing special tests
When you press the
Special
button, the available tests are shown.
You can access the
Probe Check
function from the
Special Tests
menu.
19
User Guide
Otometrics - MADSEN Zodiac
