![background image](http://html1.mh-extra.com/html/madrigal-audio/proceed-bpa-2/proceed-bpa-2_owners-manual_3354156011.webp)
11
Front Panel
1
POWER BUTTON
Pressing the latching
power
button connects the amplifier to the AC mains,
turning it
on
. Power consumption when fully on and at idle is approxi-
mately 140 watts for the BPA 2 and 210 watts for the BPA 3.
At your option, you may also toggle the BPA between a
standby
mode and
fully
on
by connecting its
remote turn on jack
to the corresponding
remote
turn on output
on a Proceed control unit such as the AVP.
When first powered up, the BPA will always go to fully
on
, regardless of the
signal present at its
remote turn-on jack
. If the control unit then turns on,
the amplifier will remain on; thereafter, the two will remain in sync. If
power is removed from the BPA, it will automatically re-sync with the con-
trol unit in the course of normal operation. No user intervention is re-
quired, beyond simply turning the system on and off from the control unit.
Power consumption in
standby
mode is significantly reduced from fully
“on”—just a few watts for the circuitry which controls the turn-on proce-
dure.
Note that if the amplifier has been disconnected from the AC mains power
by depressing the front panel
power
button, it cannot respond to a remote
turn-on command from a control unit.
2
INDICATOR LIGHT
The
indicator light
glows either amber or red, depending on the opera-
tional status of your BPA. Amber indicates that the BPA is
on
and ready to