Madison Candy Tech CT-04 Go Time, Manual

Page: 30 / 122

GB-06
1.
Fasten the charging peg of onto the four
contacts at the underside of the Candy Tech
Go Time display as shown in the picture.
2. Observe the orientation of the plug. Align
the trapezoid female and male connectors
properly. The four male contact pins
inside the USB-peg must fit snugly into
the female contact rail of the Candy Tech
Go Time. Your Candy Tech Go Time will
not charge with an improper electrical
connection.
3.
Plug the USB A plug of the cable into a
suitable USB source of power. You may
use your computer, a powered USB Hub,
or a USB charger.
4. The USB charging icon indicating the
charging status will be shown in flashing
status.
5.
The USB charging icon will show the
status ‘Full’ when the battery is fully
recharged.
6. Recharge your Candy Tech Go Time
whenever the battery is low.