Step 7.Level the chair and place the chair upright on a level surface. Assembly is complete.
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY.ALWAYS CHECK TO ENSURE
THAT ALL HARDWARE IS KEPT TIGHTENED.
Thank you for your purchase
Step 4. Attach the Seat frame(P6) to the Back fram(P5) by using lock washer(H2),flat washer (H3) . Then tighten the bolts
with allen wrench (H4).
Step 5. Attach the Left arm(P3)&Right arm(P4) by using lock washer(H2),flat washer (H3) .,bolt( H1).Then tighten the bolts
with allen wrench (H4).
Step 6.Screw in the Front leg (P1)&Back leg(P2) to seat frame by using silicone pad (H5) , plastic washer (H6) for each.
Screw tight to the right angle as bellow picture.
H1
H2
H3
H4
P6
P3
P4
P6
P6
P3
P4
P1
P1
P2
P2
P1
P2
H5
H6
H5
H6
Page 2 of 2
