ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO BE SURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
Step 2.
1) Turn the assembled chest to an upright position.
2) Remove the pulls from the back of door by unscrewing the screws with screw driver (not provided).
3) Reattach the pulls to the front of door using screws as shown below.
Pull
Door
Back
Step 3.
1)
Leveler adjustment:
Leveler are installed on the legs and adjust as needed to make sure the chest is
level.
2) Assembly is complete.
Failure to follow these instructions may cause the bolts to misalign during
assembly.
3) Recommend that you attach the products to your wall as a safety precaution.
Please see the other
instructions
"Furniture Safety Bracket Tip Resistant".
Pull
Door
Front
Leveler
Summary of Contents for Sloane Bar Cabinet
Page 3: ...Long Screw...
