ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO BE SURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
Step 2.
1) Turn over the chest (P1) on a flat, soft surface such as a carpet or cloth.
2) Then loosely attach the assembled base (P2,P3) to the bottom of the chest (P1) using bolts (H3,H4 )as shown
below. Securely tighten all bolts with Allen wrench (H5).
Step 3.
1) Turn the assembled chest to an upright position.
2) Leveler adjustment: Leveler are pre-installed on the legs and adjust as needed to make sure the desk is
level. Assembly is complete.
Failure to follow these instructions may cause the bolts to misalign during
assembly.
3)
Recommend that you attach the products to a wall as a safety precaution.
Please see the other
instructions
"Furniture Safety Bracket Tip Resistant".
(H3)x4
(H4)x4
(H5)x1
Leveler
H6
Summary of Contents for Lexnnox Chest
Page 3: ......
