Step 2
. Loosely attach the bottom frame (P2) to the legs (P3) using countersunk bolts (H5) as shown below.
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO BE SURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
Step 3.
1) Turn the assembled table to an upright position. Make sure the table is level and securely tighten all the bolts
with Allen wrench (H4).
2)
Leveler adjustment:
Leveler are installed on the legs and adjust as needed to make sure the table is
level. Assembly is complete.
Failure to follow these instructions may cause the bolts to misalign
during assembly.
H5
H4
(H5)x8
